Need more power, a safer panel, or a 200-amp service for an EV charger, heat pump or addition? Right Electrik LLC is a licensed NJ electrical contractor (Lic. #34EI01732700) based at 1767 S Broad St in Hamilton, NJ. We handle the permit and the PSE&G coordination. Serving Hamilton (Mercerville, Yardville, Hamilton Square), Trenton, Robbinsville, Bordentown, Lawrenceville and Ewing.
Tell us about your panel (amps, age, what you want to add) and we will call you back with a quote. Or call (609) 540-5392.
100A to 200A service upgrades. Older homes around Hamilton and Trenton were wired for 60 or 100 amps. Central air, an EV charger, a heat pump, a hot tub or a finished basement can push that past its limit. We replace the panel, the main breaker, the meter base and service cable as needed, pull the permit, and coordinate the PSE&G disconnect and reconnect so your power is off for as little time as possible.
Federal Pacific (Stab-Lok), Zinsco and other problem panels. These breakers are known for failing to trip under a fault. If your home still has one, we replace it with a new, code-compliant panel and breakers.
Panel repairs, sub-panels and circuit additions. Burnt bus bars, double-tapped breakers, a panel that is full, or a detached garage that needs its own sub-panel.
Every job is permitted and inspected by your town when a permit is required. Right Electrik LLC is a licensed NJ electrical contractor (Lic. #34EI01732700) based at 1767 S Broad St in Hamilton, NJ.
If you are adding an EV charger, central air, a heat pump, an electric range or dryer, or finishing a basement, a 100-amp service is often at its limit. We do a load calculation on your actual appliances and tell you honestly whether you need 200 amps or just a few new circuits.
A new panel and main breaker, often a new meter base and service entrance cable, grounding and bonding brought up to current code, a permit from your town, and a scheduled PSE&G disconnect and reconnect. We handle the permit and the utility coordination.
Federal Pacific Stab-Lok and Zinsco breakers have a documented history of failing to trip during a fault, which is a fire risk. Most insurers and home inspectors flag them. We replace them with a new code-compliant panel.
Yes. A panel or service upgrade in New Jersey requires an electrical permit and inspection, and the utility has to disconnect and reconnect the service. We take care of both as part of the job.
Typically most of one working day, depending on PSE&G’s schedule for the disconnect and reconnect. We tell you the plan before the day of the job.
Hamilton (Mercerville, Yardville, Hamilton Square), Trenton, Robbinsville, Bordentown, Lawrenceville and Ewing.
